View Memory Mode; Keypad Tamper - Intek Elite 16D Installation & Programming Manual

This Elite 16D alarm panel has an event memory which stores the 40 most recent events including all alarm events,
all system events such as mains failure etc as well as settings and unsettings This event memory is displayed via
the standard keypad with the most recent event shown first and subsequent events following in descending order
from newest to oldest.
The "MEMORY" light will flash on and off when there is a new event in memory which has not been viewed. To
stop the "MEMORY" light flashing, simply press the MEMORY button and the event memory will be flashed back to
you with the most recent event shown first. Each event is separated by a beep tone.
There are a number of events which are stored in memory which do not have a specific indicator associated with
them such as Panic and Duress. Other events such as tampers and low battery are shared across many devices.
For this reason the following table has been created. This table details which indicator lights correspond to which
events in memory.
EVENT
ACTIVATION
ACTIVATION
EXCLUDE
EXCLUDE
DETECTOR TAMPER
(SHORT CIRCUIT)
DETECTOR TAMPER
(OPEN CIRCUIT)
CABINET TAMPER
WRONG CODE ALARM
LOW BATTERY
MAINS FAILURE
LOW BATTERY
LOW BATTERY
LOW BATTERY
LOW BATTERY
DEVICE
Zones 1-8
Zones 9-16
Zones 1-8
Zones 9-16
Zones 1-8
Zones 9-16
Cabinet or Satellite Siren

Keypad Tamper

Controller Battery
Controller Mains Supply
Radio PIR
Zone 1-8
Radio PIR
Zone 19-16
Radio Key
User 1-8
Radio Key
User 9-16
Page 13
INDICATOR
LED's 1-8
LED's 1-8
AUX
EXCLUDE
LED's 1-8
EXCLUDE
LED's 1-8
AUX
TAMPER
LED's 1-8
TAMPER
LED's 1-8
AUX
TAMPER
TAMPER
BATTERY
MAINS
BATTERY
LED's 1-8
BATTERY
LED's 1-8
AUX
BATTERY
LED's 1-8
CONTROL
BATTERY
LED's 1-8
CONTROL
AUX
STATUS
On Steady
On Steady
On Steady
On Steady
On Steady
On Steady
On Steady
On Steady
Flashing
On Steady
Flashing
On Steady
On Steady
Flashing
On Steady
Flashing
Flashing
Flashing
On Steady
Flashing
On Steady
On Steady
Flashing
On Steady
Flashing
Flashing
On Steady
Flashing
On Steady