Mapping Radio Users To Outputs; Defining Time Zones - Intek Elite 16D Installation & Programming Manual

MAPPING RADIO USERS TO OUTPUTS - P601E to P616E
This block of addresses is used to map radio users to outputs in conjunction with P581E - P596E. All output
modifiers such as reset timers and lock out functions are maintained and will determine the behaviour of the
assigned output.
P601E 1-8E Radio user #1 to output 1-8 - Where options 1-8 represent outputs 1-8
P602E 1-8E Radio user #2 to output 1-8 - Where options 1-8 represent outputs 1-8
P603E 1-8E Radio user #3 to output 1-8 - Where options 1-8 represent outputs 1-8
P604E 1-8E Radio user #4 to output 1-8 - Where options 1-8 represent outputs 1-8
P605E 1-8E Radio user #5 to output 1-8 - Where options 1-8 represent outputs 1-8
P606E 1-8E Radio user #6 to output 1-8 - Where options 1-8 represent outputs 1-8
P607E 1-8E Radio user #7 to output 1-8 - Where options 1-8 represent outputs 1-8
P608E 1-8E Radio user #8 to output 1-8 - Where options 1-8 represent outputs 1-8
P609E 1-8E Radio user #9 to output 1-8 - Where options 1-8 represent outputs 1-8
P610E 1-8E Radio user #10 to output 1-8 - Where options 1-8 represent outputs 1-8
P611E 1-8E Radio user #11 to output 1-8 - Where options 1-8 represent outputs 1-8
P612E 1-8E Radio user #12 to output 1-8 - Where options 1-8 represent outputs 1-8
P613E 1-8E Radio user #13 to output 1-8 - Where options 1-8 represent outputs 1-8
P614E 1-8E Radio user #14 to output 1-8 - Where options 1-8 represent outputs 1-8
P615E 1-8E Radio user #15 to output 1-8 - Where options 1-8 represent outputs 1-8
P616E 1-8E Radio user #16 to output 1-8 - Where options 1-8 represent outputs 1-8
DEFINING TIME ZONES - P681E - P704E
This block of addresses is used to define the time zones used by outputs, users and the Auto Setting feature etc.
Time zones require a start and a finish time with the effective window as the difference between start and finish.
For this reason the finish time value must be higher than the start value. All times are set in 24 hour clock format.
P681E 1-8E
P682E 0000 - 2359E
P683E 0000 - 2359E
There are 8 time zones available and they occupy addresses P681E to P704E as each time zone requires 3
addresses to be assigned.
P681E TZ1 Day of the week
P682E TZ1 Start Time
P683E TZ1 Finish Time
P684E TZ2 Day of the week
P685E TZ2 Start Time
P686E TZ2 Finish Time
P687E TZ3 Day of the week
P688E TZ3 Start Time
P689E TZ3 Finish Time
P690E TZ4 Day of the week
P691E TZ4 Start Time
P692E TZ4 Finish Time
TZ1 days of the week - Where 1-7 represent the days of the week which the time zone
will operate where 1 = Sunday, 2 = Monday etc. A value of 8 at this address will invert
the TZ function so that instead of being effective during the window created by the start
and finish times, the TZ is effective during the times outside the window set by the start
and finish times.
TZ1 Start time - This is the time when the TZ will start. Use 24 hour format. (HHMM)
TZ1 Finish time - This is the time of day when the TZ will finish. The finish time must
be greater than the start time. Use 24 hour format. (HHMM)
P693E TZ5 Day of the week
P694E TZ5 Start Time
P695E TZ5 Finish Time
P696E TZ6 Day of the week
P697E TZ6 Start Time
P698E TZ6 Finish Time
P699E TZ7 Day of the week
P700E TZ7 Start Time
P701E TZ7 Finish Time
P702E TZ8 Day of the week
P703E TZ8 Start Time
P704E TZ8 Finish Time
Page 37