Device/Label Memory Area Setting - Mitsubishi Electric MELSEC iQ-F FX5 User Manual

12.3

Device/Label Memory Area Setting

The capacity of each data area allocated within the device/label memory can be changed.
Navigation window  [Parameter]  [FX5UCPU]  [CPU Parameter]  "Memory/Device Setting"  "Device/Label
Memory Area Setting"
Operating procedure
"Device/Label Memory Area Setting" window
Displayed items
Item
Option Battery Setting
Device/Label Device Area
Memory Area
Capacity Setting
Label Area
High-speed area: Area which can be accessed at high speed. Latch is always held by nonvolatile memory.
Standard area: Area which can be held when option battery is used. In addition, about a latched type label,
when a latch area is set as a standard latch area, latch type label is held by nonvolatile memory.
12 DEVICE/LABEL MEMORY AREA SETTING
94
12.3 Device/Label Memory Area Setting
Description
Set when using option battery.
The points which can be held can be increased by
this setup.
The latch device of standard area can be held with a
battery.
The latch area of latch label can be changed to
battery latch area from standard latch area
(nonvolatile memory).
Device (high speed) Set the capacity of device (high speed) area.
Area Capacity
Device (standard) Set the capacity of device (standard) area.
Area Capacity
Label/Latch Label Select the used device area of label and latch label
Use Device Area from standard area and high speed area.
Setting When device (high speed) area + label area + latch
label area is 12 K word or less, it is possible to set
label area/label latch area in high-speed area.
Label Area Capacity Sets the capacity of the label area to be used for
non-latched labels.
Latch Label Area Sets the capacity of the latch label area to be used
Capacity for latch-type labels.
Device/Label Display the configuration of each area which set in
Memory device/label memory area capacity.
Configuration
Confirmation
Check the Latch
Configuration
1.
In "Option Battery Setting", select whether or not to use
a option battery.
2.
In "Device/Label Memory Area Capacity Setting", set
the capacity of each area.
Setting range Default
• Not Mounted Not Mounted
• Mounted
Page 93 The
12 K word
Setting Range of the
Capacity of Each Area
Page 93 The
35 K word
Setting Range of the
Capacity of Each Area
• Standard Area Standard
• HighSpeed Area Area
Page 93 The
12 K word
Setting Range of the
Capacity of Each Area
Page 93 The
1 K word
Setting Range of the
Capacity of Each Area
 