Pwm Output Parameters - Mitsubishi Electric MELSEC iQ-F FX5 User Manual

PWM output parameters

This section explains the PWM output parameters.
Set the PWM output parameters in GX Works3.
Outline of parameters
PWM output parameters are output destination, pulse width/cycle unit, output pulse logic, pulse width, and period.
Parameter setting
This section explains how to set the PWM output parameters.
Set the output destination, pulse width/cycle unit, output pulse logic, pulse width, period, etc. of the channel to be used.
■CPU module
Navigation window  [Parameter]  [FX5UCPU]  [Module Parameter]  [High Speed I/O]  "Output Function" 
"PWM"  "Detail Setting"
Window
Displayed items
Item Description
Use PWM Output Set whether to use PWM output or not.
Output Signal Set the output destination device of output signal.
Pulse Width/Cycle Unit Set pulse width/cycle unit.
Output Pulse Logic Sets output pulse logic.
Pulse Width Sets the ON/OFF width of the pulse.
Cycle Sets cycle.
Setting range
• Disable
• Enable
Y0 to Y7
• 1ms
• 1micro-s (s)
• Positive Logic
• Negative Logic
• When pulse width/period unit is set to 1 ms
1 to 2147483 ms
• When pulse width/period unit is set to 1 micro-s
(s)
1 to 2147483647 micro-s (s)
• When pulse width/cycle unit is set to 1 ms
1 to 2147483 ms
• When pulse width/cycle unit is set to 1 micro-s
(s)
1 to 2147483647 micro-s (s)
19 HIGH-SPEED INPUT/OUTPUT FUNCTION
Default
Disable





219
19.7 PWM Function
19