Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 345

Error Error name Error details and cause
code
3686H Axis 6 positioning • Tables which cannot be used together
table shift error were specified for continuous operation.
(table • The counterpart axis for the interpolation
specification) operation table was specified.
3687H Axis 7 positioning • Tables which cannot be used together
table shift error were specified for continuous operation.
(table • The counterpart axis for the interpolation
specification) operation table was specified.
3688H Axis 8 positioning • Tables which cannot be used together
table shift error were specified for continuous operation.
(table • The counterpart axis for the interpolation
specification) operation table was specified.
3689H Axis 9 positioning • Tables which cannot be used together
table shift error were specified for continuous operation.
(table • The counterpart axis for the interpolation
specification) operation table was specified.
368AH Axis 10 • Tables which cannot be used together
positioning table were specified for continuous operation.
shift error (table • The counterpart axis for the interpolation
specification) operation table was specified.
368BH Axis 11 • Tables which cannot be used together
positioning table were specified for continuous operation.
shift error (table • The counterpart axis for the interpolation
specification) operation table was specified.
368CH Axis 12 • Tables which cannot be used together
positioning table were specified for continuous operation.
shift error (table • The counterpart axis for the interpolation
specification) operation table was specified.
3691H Axis 1 positioning • Table shift cannot be completed in time
table shift error because one or more tables shifted per
(table shift) 10 ms.
• 4 or more tables that need not to be
output were continuously specified.
• A conditional jump was executed 4 times
in a row.
3692H Axis 2 positioning • Table shift cannot be completed in time
table shift error because one or more tables shifted per
(table shift) 10 ms.
• 4 or more tables that need not to be
output were continuously specified.
• A conditional jump was executed 4 times
in a row.
3693H Axis 3 positioning • Table shift cannot be completed in time
table shift error because one or more tables shifted per
(table shift) 10 ms.
• 4 or more tables that need not to be
output were continuously specified.
• A conditional jump was executed 4 times
in a row.
3694H Axis 4 positioning • Table shift cannot be completed in time
table shift error because one or more tables shifted per
(table shift) 10 ms.
• 4 or more tables that need not to be
output were continuously specified.
• A conditional jump was executed 4 times
in a row.
Action
• Observe the restrictions on table operation.
• Observe the restrictions on table operation.
• Observe the restrictions on table operation.
• Observe the restrictions on table operation.
• Observe the restrictions on table operation.
• Observe the restrictions on table operation.
• Observe the restrictions on table operation.
• Set the interval of table shifts to 10 ms or
greater.
• Set the interval of table shifts to 10 ms or
greater.
• Set the interval of table shifts to 10 ms or
greater.
• Set the interval of table shifts to 10 ms or
greater.
Detailed Diagnostic
information timing
Error location
At END
information instruction
and system execution, at
configuration interrupt
information occurrence
Error location At END
information instruction
and system execution, at
configuration interrupt
information occurrence
Error location
At END
information instruction
and system execution, at
configuration interrupt
information occurrence
Error location At END
information instruction
and system execution, at
configuration interrupt
information occurrence
Error location At END
information instruction
and system execution, at
configuration interrupt
information occurrence
Error location At END
information instruction
and system execution, at
configuration interrupt
information occurrence
Error location At END
information instruction
and system execution, at
configuration interrupt
information occurrence
Error location
At interrupt
information
occurrence
and system
configuration
information
Error location At interrupt
information occurrence
and system
configuration
information
Error location At interrupt
information occurrence
and system
configuration
information
Error location At interrupt
information occurrence
and system
configuration
information
APPENDIX
343
Appendix 3 Error Code
A