Pwm Output Function Execution Procedure - Mitsubishi Electric MELSEC iQ-F FX5 User Manual

PWM output function execution procedure

The procedure for executing the PWM output function is explained below.
1.
Check the specifications of PWM output.
Check specifications such as pulse output performance of PWM output. (Page 216 PWM output specifications)
2.
Connect the CPU module to the external device.
For details on wiring to external devices, refer to the following manual
MELSEC iQ-F FX5U User's Manual (Hardware)
MELSEC iQ-F FX5UC User's Manual (Hardware)
3.
Set the parameters.
Set the output destination, cycle, pulse width, output pulse logic, etc. of the PWM in parameters, (Page 219 PWM output
parameters)
4.
Create the program.
Create the program for using PWM output.
5.
Run the program.
19 HIGH-SPEED INPUT/OUTPUT FUNCTION
218
19.7 PWM Function