Appendix 6
The functions added or changed with the CPU module and engineering tool, and the supported CPU modules' firmware
version and engineering tool software version are given below.
• The firmware version can be confirmed with module diagnosis (CPU diagnosis). Refer to the User's Manual (Hardware) for
the CPU module in use for details on diagnosing the module (CPU diagnosis).
• Refer to the GX Works3 Operating Manual for details on the software version.
Add/Change Function
The number of settable high-speed
comparison tables was changed from
maximum 4 to 32.
The number of high-speed
comparisons was changed from 4 to
32.
Support high-speed pulse input/
output module
*1 Supported with CPU module serial No. 158**** and above.
APPENDIX
360
Appendix 6 Added and Enhanced Functions
Added and Enhanced Functions
Supported CPU module
firmware version
*1
"1.015" and above
*1
"1.015" and above
"1.030" and above
Supported engineering tool
software version
"1.015R" and above
"1.015R" and above
"1.025B" and above
Reference
Page 134
Page 177