Label Access Setting From External Device - Mitsubishi Electric MELSEC iQ-R Series User Manual

1.4

Label Access Setting from External Device

This setting enables external devices to communicate with the remote head module through GOT, SLMP, or other method by
specifying global label names.
Communication by specifying global label names includes the following:
• Communication from external devices (such as a monitoring device and personal computer) using label names
• Specification of label names for GOT (engineering tool for GOT) objects and figures
Ethernet
· ·
(1) (2)
(1) Remote head module
(2) Ethernet-equipped module
The local label and module label cannot be accessed from external devices
Setting procedure
This section describes the setting procedure to enable access from external devices by specifying the global label name.
Operating procedure
File operation
The label communication data can be written from an engineering tool. Reading and deleting
*1 Deleting an entire folder is possible.
GOT
1.
Set the label in "Global [Global Label Setting]"
and select the "Access from External Device"
checkbox.
[Navigation window]  [Label]  [Global
Label]  [Global]
2.
Check the capacity of the label communication
data.
[Online]  [CPU Memory Operation]
 GX Works3 Operating Manual
3.
Write the parameters, global label setting, and
global label assignment information files to the
remote head module.
*1
are not possible.
1.4 Label Access Setting from External Device
1
1 FUNCTIONS
29