Appendix 3
The functions added or changed with the CPU module and engineering tool, and the supported CPU modules' firmware
version and engineering tool software version are given below.
• The firmware version can be confirmed with module diagnosis (CPU diagnosis). Refer to the User's Manual (Hardware) for
the CPU module in use for details on diagnosing the module (CPU diagnosis).
• Refer to the GX Works3 Operating Manual for details on the software version.
Add/Change Function
Expanding the number of input/output
points to 384 points.
Removing the limitation on the
number of remote I/O points. (384
points)
(However, the total number of remote
I/O points and input/output points is
512 points or less.)
Expanding the program capacity up
to 128 k steps.
APPX
46
Appendix 3 Added and Enhanced Functions
Added and Enhanced Functions
Supported CPU module
firmware version
"1.100" and above
"1.100" and above
"1.100" and above
Supported engineering tool
software version
"1.047Z" and above
"1.047Z" and above
"1.047Z" and above
Reference
Page 19
Page 19
Page 19