CyberData 011414 Operation Manual page 73

Web Page Item
Event Server
Server IP Address
Server Port
Server URL
Note
Note
Note
Operations Guide
Table 2-18. Events Configuration Parameters(continued)
You must click on the Save button for the changes to take effect.
Enabling Event Generation or changing an
changes to take effect.
Selecting particular events,
changes to take effect.
931338B
Installing the SIP-enabled h.264 Video Outdoor Intercom with Keypad
Description
The IPv4 address of the event server in dotted decimal notation.
Specify the event server port number. The supported range is 0-
65536. Enter up to 5 digits.
Generally, the destination URL is the name of the application that
receives the events and the string in the HTTP POST command. It
can be a script used to parse and process the HTTP POST events.
Enter up to 127 characters.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
Click on the Toggle Help button to see a short description of some
of the web page items. First click on the Toggle Help button, and
you will see a question mark (
page items. Move the mouse pointer to hover over a question mark
to see a short description of a specific web page item.
Event Server
Check All, or Uncheck All
Configure the Intercom Parameters
) appear next to some of the web
setting requires a reboot for the
does not require a reboot for the
CyberData Corporation
66