CyberData 011414 Operation Manual page 43

Web Page Item
Prevent Call Termination
Disable HTTPS (NOT recommended)
Note
Note
Note
Note
Operations Guide
Table 2-8. Device Page Parameters (continued)
Description
When this option is enabled, a call cannot be terminated using the call
button.
Disables the encrypted connection to the webpage. We do not
recommend disabling HTTPS for security reasons.
Click on the Test Audio button to do an audio test. When the Test Audio
button is pressed, you will hear a voice message for testing the device
audio quality and volume.
Click on the Test Microphone button to do a microphone test. When the
Test Microphone button is pressed, the following occurs:
1. The device will immediately start recording 3 seconds of audio.
2. The device will beep (indicating the end of recording).
3. The device will play back the recorded audio.
Click on the Test Relay button to do a relay test.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
Click on the Toggle Help button to see a short description of some of the
web page items. First click on the Toggle Help button, and you will see a
question mark (
mouse pointer to hover over a question mark to see a short description of
a specific web page item.
You must click on the Save button and then the Reboot button for the changes to take
effect.
The SIP Volume, Multicast
require a reboot for the changes to take effect.
None of the Relay Settings
The Disable HTTPS (NOT recommended)
effect.
931338B
Installing the SIP-enabled h.264 Video Outdoor Intercom with Keypad
) appear next to some of the web page items. Move the
Volume, Ring Volume, and
require a reboot for the changes to take effect.
setting requires a reboot for the changes to take
Configure the Intercom Parameters
Sensor Volume settings do not
CyberData Corporation
36