Measurement Tab Options - AEMC PEL102 User Manual

4.4.3 Measurement tab options

The Measurement tab of the Configure Instrument dialog box specifies the electrical distribution system, voltage ratios,
nominal frequency and current probe options.
Distribution system:
■
A box listing each of the distribution systems supported by the instrument (see §3.6 for available distribution
systems descriptions).
■
An image is displayed to the right of the list illustrating the connection diagram for the selected distribution
system.
Selection of DC 2-, 3- or 4-Wire implies DC measurements only. Selection of other distribution systems implies AC mea-
surements only.
Nominal voltage and voltage ratio:
■
Set a Voltage Transformer Ratio: When checked, the following fields are enabled (based on the selected
distribution system)
-
Primary: Indicates a level on the primary side of the isolation transformer.
-
Secondary: Indicates a level on the secondary side of the isolation transformer.
Power & Energy Logger Model PEL 102 and PEL 103
Find Quality Products Online at:
Figure 57
GlobalTestSupply
www. .com
sales@GlobalTestSupply.com
59