Reference Manual
00809-0100-4408, Rev BA
3.4.2
Shorten the extended cone antenna
This section only applies to the extended cone antenna (option code S1).
To determine the antenna length, follow the guidelines in section
1. Mark where to cut the antenna.
2. Cut the antenna at the marking.
3. Remove any burrs.
4. Measure the Antenna Extension Length (L).
5. Update the transmitter configuration to the new Antenna Extension Length (L).
Rosemount Radar Master Plus:
Mechanical Installation
L
Under Configure, select Level Setup > Antenna.
Mechanical Installation
"Nozzle requirements" on page
AMS Device Manager and Field Communicator:
Select Configure > Manual Setup > Level Setup >
Antenna.
November 2017
16.
23