Emerson Rosemount 5408 Reference Manual page 62

Mechanical Installation
November 2017
3. Remove the protection plates and visually inspect the internal surfaces of the flange ball for damage
and dirt.
4. Mount the O-ring.
5. Mount the ball joint.
a. Insert the ball joint and place the clamp flange with the "7 Nm" marking side up.
b. Gradually tighten the M8 screws.
50
H
L
J
K
I
H6 mm
Torque 65 in-lb (7 N-m)
Reference Manual
00809-0100-4408, Rev BA
Mechanical Installation