Installing Standard And Extended Life Power Module - Emerson Fisher 4320 Instruction Manual

Instruction Manual
D103621X012
WARNING
The 4320 power module contains two primary lithium­thionyl chloride batteries. Under normal conditions of use, the
battery materials are self­contained and are not reactive as long as the batteries and power module integrity are
maintained. Care should be taken to prevent mechanical, electrical, or thermal damage. DO NOT recharge, short-circuit,
disassemble, heat, or expose the power module to water. The batteries contain flammable materials and performing any of
the above actions could cause them to become damaged, ignite, or explode, resulting in personal injury or property
damage. Observe all warnings included with the power module before installing, operating, storing, or shipping the 4320
position monitor.
Personal injury and property damage can result from fire or explosion if the power module is subjected to heat above
100_C (212_F). Power modules should be stored in a cool, dry and ventilated area; for maximum life, storage should not
exceed 30_C (86_F).
CAUTION
When installing components, proper means of electrostatic discharge protection is required. Failure to use a grounding
strap, or other means of electrostatic discharge protection can result in damage to the electronics.
WARNING
To avoid static discharge do not rub or clean the antenna with solvents.
Installing Standard and Extended Life Power Modules
There are two battery-sourced power options, standard life and extended life power modules. Refer to the power
module warning labels, shown in figure 4, to determine which power module you have. Refer to figure 5 when
installing.
Figure 4. Warning Labels from Power Module
GE57654X012
STANDARD LIFE POWER MODULE
Note
Default configuration is for a standard power module. If installing the extended life power module you must change the
configuration. Incorrect power module configuration will affect remaining days of life calculations. If using the Field
GE57655X012
EXTENDED LIFE POWER MODULE
4320 Position Monitor
October 2012
9