Wiring And Power Up - Emerson Rosemount 5408 Reference Manual

Reference Manual
00809-0100-4408, Rev BA
4.8

Wiring and power up

1. Verify the power supply is disconnected.
2. Remove the cover.
3. Remove the plastic plugs.
4. Pull the cable through the cable gland/conduit.
1. Unless marked, the conduit/cable entries in the transmitter housing use a ½–14 NPT thread form.
Electrical Installation
Identification of thread size and type
½-14 NPT M20 x 1.5
(1)
Electrical Installation
November 2017
63