Custom Engineered Solutions beyond standard model codes. Consult factory for details.
Typical model number: 5408 Z 9 Z Z Z Z NA 1 R 3 AB CAB 3
1.
Type A flat face for EN 1092-1 flanges.
2.
Type B1 raised face for EN 1092-1 flanges.
3.
Only available with cone antenna.
4.
Only available with process seal antenna.
5.
Pressure limit is derated for process temperatures above 100 °F (38 °C), see
6.
Refer to
Figure A-6 on page 140
7.
Option code PC1 is for cone antennas only, and requires matching flange and antenna sizes. Note that all parabolic antennas come with an integrated air purge connection.
8.
Only applies to flanged process connections with welded construction; only applicable to cone antennas (see
9.
Hydrostatic testing is only available for cone antennas and process seal antennas with flanged process connections.
10.
Certificate includes all pressure retaining and wetted parts.
11.
Not available with parabolic antenna.
Table A-15. Accessories
HART modem and cable
03300-7004-0002
MACTek
162
for pressure/temperature ratings of Tri Clamp connection.