Adjust Display Orientation (Optional) - Emerson Rosemount 5408 Reference Manual

Level transmitters. non-contacting radar
Hide thumbs Also See for Rosemount 5408:
Table of Contents

Advertisement

Reference Manual
00809-0100-4408, Rev BA
3.8

Adjust display orientation (optional)

To improve field access to wiring or to better view the optional LCD display:
1. Loosen the set screw until the transmitter housing can rotate smoothly.
2. First, rotate the housing clockwise to the desired location. If the desired location cannot be achieved
due to thread limit, rotate the housing counterclockwise to the desired location (up to 360° from
thread limit).
3. Re-tighten the set screw.
Figure 3-18. Rotate the Transmitter Housing
Note
In high vibration applications, the transmitter housing must be fully engaged into the sensor module to
meet the vibration test specifications. This is achieved by rotating the transmitter housing clockwise to
thread limit.
Mechanical Installation
Torque 30 in-lb (3 N-m)
H3/32 in.
Mechanical Installation
November 2017
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sis

Table of Contents