Reference Manual
00809-0100-4408, Rev BA
9. Attach and tighten the covers. Make sure the covers are fully engaged.
a. Verify the cover jam screws are completely threaded into the housing.
b. Attach and tighten the covers.
c. Turn the jam screw counterclockwise until it contacts the cover.
d. Turn the jam screw an additional ½ turn counterclockwise to secure the cover.
10. Connect the power supply.
Note
It may take up to 15 seconds before the LCD display lights up.
Electrical Installation
Cover jam screw
(one per side)
Required for explosion-proof/flameproof installations only.
Electrical Installation
November 2017
H2.5 mm
65