Adjusting The Headlight Beam - Yamaha SR400 2014 Service Manual

2. Disconnect:
• Headlight coupler "1"
3. Remove:
• Headlight bulb cover "2"
4. Unhook:
• Headlight bulb holder "1"
5. Remove:
• Headlight bulb "2"
1
EWA13320
WARNING
Since the headlight bulb gets extremely hot,
keep flammable products and your hands
away from the bulb until it has cooled down.
6. Install:
• Headlight bulb
New
Secure the new headlight bulb with the head-
light bulb holder.
ECA13690
NOTICE
Avoid touching the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the life of the
bulb and the luminous flux will be adversely
affected. If the headlight bulb gets soiled,
thoroughly clean it with a cloth moistened
with alcohol or lacquer thinner.
7. Hook:
• Headlight bulb holder
8. Install:
2
• Headlight bulb cover
9. Connect:
1
• Headlight coupler
10.Install:
• Headlight unit assembly
• Screw
EAS21800

ADJUSTING THE HEADLIGHT BEAM

1. Adjust:
• Headlight beam (vertically)
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
1
a. Loosen the adjusting screw "1" and move the
headlight unit in direction "a" or "b" for adjust-
2
ment.
Direction "a"
Headlight beam is raised.
Direction "b"
Headlight beam is lowered.
2
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
2. Adjust:
• Headlight beam (horizontally)
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Turn the adjusting screw "1" in direction "a" or
"b" for adjustment.
Direction "a"
Headlight beam moves to the right.
Direction "b"
Headlight beam moves to the left.
3-26
PERIODIC MAINTENANCE
b
a
1