Yamaha SR400 2014 Service Manual page 79

1. Fuel pump case box
2. Breather hose
3. Pressure regulator
4. Fuel pipe
5. Fuel hose (pressure regulator–fuel pipe)
6. Fuel hose (fuel pipe–fuel tank)
A. Avoid contact of the end of the breather hose with
the damper.
B. Install the breather hose to the air filter case
holder.
C. 20.0 mm (0.79 in)
D. Point the green paint mark upward.
E. Align the fuel hose and fuel pipe yellow paint
marks with each other. Point the paint mark
upward.
F. 60
G. Point the end of the clamp to the inside.
H. Point the end of the clamp to the fuel rail side.
I. Insert the fuel hose (pressure regulator–fuel pipe)
into the bulge of the pressure regulator.
J. To the air filter case
K. Point the end of the clamp toward the outside of
the vehicle.
L. Install the cover to the clamp to avoid slack.
2-52
CABLE ROUTING