9. Check the engine stop switch.
Refer to "CHECKING THE
SWITCHES" on page 7-55.
OK
10.Check the neutral switch.
Refer to "CHECKING THE
SWITCHES" on page 7-55.
OK
11.Check the sidestand switch.
Refer to "CHECKING THE
SWITCHES" on page 7-55.
OK
12.Check the clutch switch.
Refer to "CHECKING THE
SWITCHES" on page 7-55.
OK
13.Check the diode 1.
Refer to "CHECKING THE DIODE" on
page 7-64.
OK
14.Check the lean angle sensor.
Refer to "CHECKING THE LEAN
ANGLE SENSOR" on page 7-67.
OK
15.Check the entire ignition system
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 7-1.
OK
Replace the ECU (engine control
unit).
Replace the right handlebar switch.
NG
Replace the neutral switch.
NG
Replace the sidestand switch.
NG
Replace the clutch switch.
NG
Replace the diode 1.
NG
Replace the lean angle sensor.
NG
Properly connect or repair the ignition sys-
tem wiring.
NG
7-6
IGNITION SYSTEM