Yamaha SR400 2014 Service Manual page 126

c
4. Tighten:
• Wheel axle nut
• Axle holder nut "1"
ECA14140
NOTICE
Before tightening the wheel axle nut, push
down hard on the handlebar(s) several times
and check if the front fork rebounds smooth-
ly.
TIP
• Make sure that an arrow of the axle holder
points toward the front "A".
• Tighten the axle holder nut at the front side first
and then the rear side.
Wheel axle nut
104 Nm (10.4 m·kgf, 75 ft·lbf)
Axle holder nut
9 Nm (0.9 m·kgf, 6.5 ft·lbf)
1
A
5. Install:
• Speedometer cable
d
1
4-10
FRONT WHEEL