Yamaha SR400 2014 Service Manual page 67

1. Clutch cable
2. Decompression cable
3. Brake hose
4. Throttle cable
5. Front brake light switch lead
6. Right handlebar switch lead
7. Left handlebar switch lead
8. Clutch switch lead
9. Handlebar
A. Fasten the right handlebar switch lead and front
brake light switch lead with the plastic locking tie.
B. Route the wire harness to the inside of the frame.
C. Fasten the left handlebar switch lead and clutch
switch lead with the plastic locking tie.
D. Front of the vehicle
E. Fasten the leads to the lower side of the vehicle
with the plastic locking tie. Point the tie of the plas-
tic locking tie forward with its end facing down-
ward. Do not cut off the excess end of the plastic
locking tie.
2-40
CABLE ROUTING