Yamaha SR400 2014 Service Manual page 159

front fork legs.
1. Install:
• Front fork leg
Temporarily tighten the upper and lower
bracket pinch bolts.
TIP
Make sure the inner tube is flush with the top of
the upper bracket.
2. Tighten:
• Lower bracket pinch bolt "1"
Lower bracket pinch bolt
17 Nm (1.7 m·kgf, 12 ft·lbf)
• Cap bolt "2"
TIP
Tighten the cap bolt with a 17 mm (0.67 in) hexa-
gon wrench "3".
Cap bolt
23 Nm (2.3 m·kgf, 17 ft·lbf)
• Upper bracket pinch bolt "4"
Upper bracket pinch bolt
16 Nm (1.6 m·kgf, 12 ft·lbf)
• Fork boot lock screw "5"
EWA13680
WARNING
Make sure the brake hoses are routed prop-
erly.
Fork boot lock screw
2.5 Nm (0.25 m·kgf, 1.8 ft·lbf)
5
1
4-43
FRONT FORK
3
2
4