Yamaha SR400 2014 Service Manual page 21

EAS20260
SPECIAL TOOLS
The following special tools are necessary for complete and accurate tune-up and assembly. Use only
the appropriate special tools as this will help prevent damage caused by the use of inappropriate tools
or improvised techniques. Special tools, part numbers or both may differ depending on the country.
When placing an order, refer to the list provided below to avoid any mistakes.
TIP
• For U.S.A. and Canada, use part number starting with "YM-", "YU-", or "ACC-".
• For others, use part number starting with "90890-".
Tool name/Tool No.
Slide hammer bolt
90890-01083
Slide hammer bolt 6 mm
YU-01083-1
Weight
90890-01084
Weight
YU-01083-3
Crankcase separating tool
90890-01135
Crankcase separator
YU-01135-B
Flywheel puller
90890-01189
Flywheel puller
YM-01189
Rotor holding tool
90890-01235
Universal magneto and rotor holder
YU-01235
Illustration
YU-01083-3
1-12
SPECIAL TOOLS
Reference
pages
5-14, 5-15
5-14
5-50, 5-53
5-47
5-7, 5-11, 5-47