Add Devices; Play Unencrypted Content; Play Encrypted Content; Connect Devices To The Projector - Christie CP42LH User Manual

Add Devices

This section describes input connections and how to connect devices to the projector.

Play unencrypted content

1. To play unencrypted content, connect the projector to a device such as a computer, a Blu-ray
player, or a game console with an HDMI to DVI connection.
2. To play audio content, connect the audio output cables to an audio processor.
See the documentation included with the device for detailed set up instructions.

Play encrypted content

1. To play encrypted cinema content, use the Integrated Media Block (IMB).
2. Connect the projector to a network-attached storage (NAS) or direct-attached storage (DAS)
device.

Connect devices to the projector

This section provides information and procedures for connecting input devices to the projector. You
connect input devices to the Projector Intelligence Board (PIB) located on side of the projector.
1. To access the communication ports, remove the access panel.
2. Route all cables along the channels located on the bottom of the projector and up through the
opening in the frame to the communication connection port.
3. Replace the access panel to ensure server and source connections remain secure.
CP42LH User Guide
020-101363-03 Rev. 1 (08-2016)
57