Table of Contents
Advertisement
Field
L/R Display Sequence
3D Sync Polarity
Dark Time
Output Delay
Phase Delay
7. To activate the channel, tap Activate.
Activate a channel
1. Tap Menu > Channel Setup.
2. Select a channel in the Channel Name list.
3. Tap Activate.
Restore default channel settings
1. Tap Menu > Channel Setup.
2. Select a channel in the Channel Name list.
3. Tap Defaults.
4. To restore the default settings to the selected channel, tap Default Current Channel.
5. To restore the default settings to all channels, tap Default All Channels.
6. Tap OK.
CP42LH User Guide
020-101363-03 Rev. 1 (08-2016)
Description
Defines the frame order (L-R or R-L) required for 3D perspective. This option
only has meaning when the Frame Rate factor M is equal to 2. For this case, 2
input frames of data are required to constitute a complete frame of image data.
This parameter tells the system which frames go together to make a complete
image.
Note: When using Line Interleave as the 3D Sync Input Mode, ensure that
Left (L1R1 L2R2) is selected.
Keeps 3D stereo sync output the same as input (true) or reversed (inverted).
True: 3D L/R sync output from GPO will match L/R sync input.
Inverted: 3D L/R sync output from GPO will be the opposite of sync input (left
= right, right = left).
Creates a blank time interval between left and right frames to allow for LCD
shutter glasses, Z screen, or rotating 3D wheel to synchronize the output. See
Dark Time and Output Delay Notes below. Values between 0 and 65535 are
accepted. To enter the dark time value, tap Launch Dialog
The non-image time in Microseconds (μ). Offset 3D stereo sync output in
relation to dark time interval. Acceptable values are between -32768 and 32767.
A positive offset adds a delay and a negative offset starts playback early. To
enter the output delay value, tap Launch Dialog.
The degree of reference between the left and right sync output. Values between
-180 and 180 are accepted. To enter the phase delay, tap Launch Dialog.
Work with Channels
.
36
Advertisement
Table of Contents
