Create A Screen File; Modify A Screen File; Create A Mcgd File - Christie CP42LH User Manual

Create a screen file

Use screen files to define the size of the display panel and image cropping. You can assign the same
screen file to multiple input devices.
1. Tap Menu > Advanced Setup > Screen File Setup.
2. Tap Save As.
3. Type a name for the source file in the Filename field.
4. Tap OK.
5. Complete these fields:
Field Description
Letter Box All image data is displayed and the aspect ratio is maintained.
Lens Factor The amount to stretch an image horizontally. Allowable values can range from 0.00 to
7.99. Type 1 if not using an anamorphic lens.
Presentation The size and location of the image. By default, the projector uses a 2048 x 1080
panel.
Cropping Hides unwanted image data.
6. Tap Save.

Modify a screen file

1. Tap Menu > Advanced Setup > Screen File Setup.
2. Select a screen file in the Current Screen File list.
3. Modify the screen file settings.
4. Tap Save.

Create a MCGD file

Create Measured Color Gamut Data (MCGD) files to correct on-screen colors. A colorimeter is
required to complete this procedure.
1. Turn the lasers on and allow it to operate for 20 minutes.
2. Tap Menu > Advanced Setup > MCGD File Setup.
3. Tap Save As.
4. Type a name for the MCGD file in the Filename field.
5. Tap OK.
6. If the MCGD file will be associated with a 3D channel, tap Enable 3D and select a frame rate in
the Frame Rate N:M list.
CP42LH User Guide
020-101363-03 Rev. 1 (08-2016)
Manage Projector Setting Files
39