Clean The Laser Module Filter - Christie CP42LH User Manual

5. Install a clean air filter with the airflow indicator pointing toward the projector.
6. Replace the cover.

Clean the Laser Module filter

1. Shut down the system.
See Shut down for maintenance
2. At the front of the Laser Module, tilt the top of the air filter toward you and lift out.
3. Pull the filter out and wash it.
See Clean a washable filter
4. To replace the filter when dry, hold the air filter with the airflow indicator pointing toward the
Laser Module.
5. Tilt the lower end of the filter into the bracket and attach to the Laser Module.
CP42LH User Guide
020-101363-03 Rev. 1 (08-2016)
on page 68.
on page 75.
Maintenance
79