Manage User Accounts; User Access Permissions; Add A User Account - Christie CP42LH User Manual

Manage User Accounts

User access permissions

This table lists the Touch Panel Controller (TPC) permissions:
Permission Description
Status Can view basic projector status, diagnostic information and software version information. This
is the default level for Serial Communication sessions.
Operator Can activate channels and test patterns, view detailed diagnostic logs for in-depth
troubleshooting and view server errors. This is the default level at the TPC.
Advanced Can define all display setups such as source resolution, aspect ratio, image cropping, and color
gamut information, optimize light output, and define setup files as selectable choices for
processing a variety of incoming signals.
Administrator Can perform screen Foot Lambert calibration, define Ethernet settings (IP network address),
restore backup files, and upgrade the system software.
Note: Administrators can add users and set user access rights from its own level and below
only.
Service Can access all windows on the TPC, except marriage.
Marriage Can access all windows on the TPC, including marriage.

Add a user account

You need Administrator or Service permissions to complete this procedure.
1. Tap Menu > Administrator Setup > User Accounts.
2. Tap Add.
3. Tap Launch Dialog
4. Tap Enter.
5. Repeat steps 3 and 4 for the Password and Confirm Password fields.
6. Select access permissions for the user in the Permissions list.
7. Tap Accept.
CP42LH User Guide
020-101363-03 Rev. 1 (08-2016)
in the Username field and type the user name.
51