Turn The System Off In An Emergency - Christie CP42LH User Manual

2. On the TPC, tap and hold the red power
The projector enters standby mode.
If performing maintenance on the projector or removing the outer skins, disconnect the
projector from AC power. See

Turn the system off in an emergency

1. To shut down the system in an emergency, press E-Stop on the back of the projector (see
Projector safety features
safety features
The Laser Modules turn off.
CP42LH User Guide
020-101363-03 Rev. 1 (08-2016)
Shut down for maintenance
on page 22) or on the operator side of the Laser Rack (see
on page 21).
Operate the Projector and Run Diagnostics
icon.
on page 67.
LM Rack
32