Work with Test Patterns
Add or remove test patterns from the preferred
test patterns pane
You need Administrator or Service permissions to complete this procedure.
1. Tap Menu > Administrator Setup > Preferred Test Pattern Setup.
2. To add a test pattern to the Preferred Test Pattern pane, tap and drag a test pattern from the
Unselected Patterns list to User Selected (Drag and Drop) pane.
3. To remove a test pattern from the Preferred Test Pattern pane, tap and drag a test pattern from
the User Selected (Drag and Drop) pane to the recycle bin in the bottom right corner.
Turn a test pattern on or off
1. In the task bar, tap the Test Pattern
2. Tap All Test Patterns.
3. Tap a test pattern in the Preferred Test Patterns pane to turn it on.
4. To turn the test pattern off, tap Test Pattern Off.
Display a full screen test pattern
1. In the task bar, tap Test Pattern
2. Tap All Test Patterns.
3. Double-tap a test pattern in the Preferred Test Patterns pane to turn it on.
4. Tap Full Screen (Ignore screen file settings).
CP42LH User Guide
020-101363-03 Rev. 1 (08-2016)
.
.
56