Table of Contents
Advertisement
The Main screen
Use the Main screen of the Touch Panel Controller (TPC) to access power, lasers, douser, channel,
and test pattern settings.
A
J
A
A green LED indicates that the projector is operating properly. If a monitored system falls below a normal
reading, the LED is yellow or red. A yellow LED indicates a warning and a red LED indicates a critical error
you must correct. Click the status LED to open the Status window and resolve issues.
B
Displays custom projector settings.
C
Displays 64 saved channels.
D
Turns the projector on or off. Tap Off to place the projector in stand-by mode. To prevent accidental
activation, tap and hold On or Off. A message displays in the title bar when the projector turns on or off.
E
Turns the lasers on or off. To prevent accidental activation, tap and hold On or Off.
F
Opens or closes the douser.
Controls the Intelligent Lens System (ILS) lens motors. Tap to open the ILS File Setup window.
H
Selects or disables test patterns. To open the Preferred Test Patterns window, tap the Test Pattern.
I
To access projector menu, tap Menu.
CP42LH User Guide
020-101363-03 Rev. 1 (08-2016)
B
I
Operate the Projector and Run Diagnostics
C
D
E
F
G
H
26
Advertisement
Table of Contents
