Getting Started; Commissioning The Simatic Iot2000 Sg-Shield - Siemens SIMATIC IOT2000 SG-Shield Operating Instructions Manual

Getting Started

1.1

Commissioning the SIMATIC IOT2000 SG-Shield

Requirement
You have read the following safety instructions:
• General safety information (Page 11)
• Basic safety information: Connecting (Page 15)
Read the entire device manual in order to achieve the optimum performance of the device.
Procedure
1. Install the SIMATIC IOT2000 SG-Shield into the SIMATIC IOT2050.
Installing the SIMATIC IOT2000 SG-Shield (Page 13)
2. Connect the load cells to the SIMATIC IOT2000 SG-Shield.
Connecting the SIMATIC IOT2000 SG-Shield (Page 16)
3. Parameterize SIMATIC IOT2050.
Parameterizing SIMATIC IOT2050 (Page 18)
4. Calibrate your scale with Node-Red.
Calibrate scale with Node-Red (Page 18)
SIMATIC IOT2000 SG-Shield
Operating Instructions, 08/2021, A5E50985404-AA
1
5