Interface Bridge-Aggregation; Interface Route-Aggregation - HP 12500 Series Command Reference Manual

Field
Remote

interface bridge-aggregation

Use interface bridge-aggregation to create a Layer 2 aggregate interface and enter the Layer 2
aggregate interface view.
Use undo interface bridge-aggregation to remove a Layer 2 aggregate interface.
Syntax
interface bridge-aggregation interface-number
undo interface bridge-aggregation interface-number
Default
No Layer 2 aggregate interface is created.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
interface-number: Specifies a Layer 2 aggregate interface number in the range of 1 to 1024.
Usage guidelines
When you create a Layer 2 aggregate interface, the system automatically creates a Layer 2
aggregation group with the same number, which operates in static aggregation mode by default.
If you remove the Layer 2 aggregate interface, you also remove the Layer 2 aggregation group, and
any member ports leave the aggregation group.
Examples
# Create Layer 2 aggregate interface Bridge-Aggregation 1, and enter its view.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1]

interface route-aggregation

Use interface route-aggregation to create a Layer 3 aggregate interface or subinterface and enter
the Layer 3 aggregate interface or subinterface view.
Description
Information about the remote end:
•
Actor—Port type and number of the local end.
•
Partner—Port index of the remote end.
•
Priority—Port priority of the remote end.
•
Oper-Key—Operational key of the remote port.
• System ID—System ID of the remote end.
•
Flag—LACP state flag of the remote end.
26