Vacon 100 hvac Applications Manual page 76

VACON · 76
Table 17: Standard I/O board analogue output settings
Index Parameter
P3.5.4.1.3 AO1 minimum
P3.5.4.1.4 AO1 minimum scale
P3.5.4.1.5 AO1 maximum scale
SLOT C, D AND E ANALOGUE OUTPUTS
Shows only parameters for existing outputs in slot C/D/E. The selections are the same as in
Basic A01. This group or these parameters are not visible if there are no digital outputs in
slots C, D or E.
5
Min Max Unit
0 1
Varies Varies Varies
Varies Varies Varies
PARAMETERS MENU
Default ID Description
0 = 0 mA / 0V
1 = 4 mA / 2V
Make the selection of
0 10052
the signal type (cur-
rent/voltage) with the
dip switches. The ana-
logue output scaling is
different in P3.5.4.1.4.
The minimum scale in
process unit. Depends
0.0 10053
on the selection of the
AO1 function.
The maximum scale in
process unit. Depends
0.0 10054
on the selection of the
AO1 function.
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205