Vacon 100 hvac Applications Manual page 16

VACON · 16
Table 2: Quick Setup parameter group
Index Parameter
Motor Nominal Volt-
P1.1
age
Motor Nominal Fre-
P1.2
quency
Motor Nominal
P1.3
Speed
Motor Nominal Cur-
P1.4
rent
P1.5 Motor Cos Phi
P1.6 Motor nominal power
P1.7 Motor Current Limit
P1.8 Minimum Frequency
P1.9 Maximum Frequency
I/O Control Refer-
P1.10
ence A Selection
P1.11 Preset frequency 1
P1.12 Preset frequency 2
1
Min Max Unit
Varies Varies V
8.0 320.0 Hz
24 19200 rpm
Varies Varies A
0.30 1.00
Varies Varies kW
Varies Varies A
0.00 P1.9 Hz
P1.8 320.00 Hz
1 8
P3.3.1 300.00 Hz
P3.3.1 300.00 Hz
QUICK STARTUP GUIDE
Default ID Description
Find this value U
Varies 110 the nameplate of the
motor. See P3.1.1.1.
Find this value f
50 111 the nameplate of the
motor. See P3.1.1.2.
Find this value n
Varies 112 the nameplate of the
motor.
Find this value I
Varies 113 the nameplate of the
motor.
Find this value on the
Varies 120 nameplate of the
motor.
Find this value n
Varies 116 the nameplate of the
motor.
The maximum motor
Varies 107 current from the AC
drive.
The minimum fre-
Varies 101 quency reference that
is acceptable.
The maximum fre-
50.00 102 quency reference that
is acceptable.
The selection of the
frequency reference
6 117 source when the con-
trol place is I/O A. See
P3.3.3 for selections.
Select with the digital
input: Preset frequency
10.00 105 selection 0 (P3.5.1.15)
(Default = Digital Input
4)
Select with the digital
input: Preset frequency
15.00 106 selection 1 (P3.5.1.16)
(Default = Digital Input
5)
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205
on
n
on
n
on
n
on
n
on
n