Vacon 100 hvac Applications Manual page 40

VACON · 40
2 To make a selection of the Control page, push the
arrow buttons Up and Down. Go in with the OK
button. The control page opens.
3 If you use the Local control place and the keypad
reference, you can set P3.3.6 Keypad Reference
with the OK button.
See more information about the Keypad Reference in Chapter 5.3 Group 3.3: Control
reference settings). If you use other control places or reference values, the display shows the
frequency reference, which you cannot edit. The other values on the page are
Multimonitoring values. You can make a selection of the values that show up here (see
instructions in Chapter 4.1.1 Multimonitor).
CHANGING THE ROTATION DIRECTION
You can change the rotation direction of the motor quickly with the Funct button.
NOTE!
The command Change direction is available in the menu only if the current control
place is Local.
1 Anywhere in the menu structure, push the Funct
button.
2 To make a selection of the Change direction, push
the arrow buttons Up and Down. Push the OK
button.
3 Make a selection of a new rotation direction. The
current rotation direction blinks. Push the OK
button. The rotation direction changes immediately,
and the arrow indication in the status field of the
display changes.
3
USER INTERFACES
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205