Vacon 100 hvac Applications Manual page 163

PARAMETER DESCRIPTIONS VACON · 163
Mains
K2 K3
M1 M2 M3
Motor 1 control from relay Motor 2 control from relay Motor 3 control from relay
NOT USED K2
K3
Fig. 44: Selection 0
SELECTION 1, ENABLED
To include the regulating motor in the autochange or in the interlock logic, obey the
instructions in the figure below. 1 relay controls each motor. The contactor logic always
connects the first motor to the drive, and the next motors to the mains.
9
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM