Vacon 100 hvac Applications Manual page 69

PARAMETERS MENU
Table 14: Digital input settings
Index Parameter
P3.5.1.25 PID2 Select Setpoint
P3.5.1.26 Motor 1 Interlock
P3.5.1.27 Motor 2 Interlock
P3.5.1.28 Motor 3 Interlock
P3.5.1.29 Motor 4 Interlock
P3.5.1.30 Motor 5 Interlock
P3.5.1.31 Motor Potentiometer UP
P3.5.1.32 Motor Potentiometer DOWN
P3.5.1.33 Acc/Dec Time Sel
P3.5.1.34 Fieldbus control
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
Default ID
DigIN Slot0.1 1048
DigIN Slot0.2 426
DigIN Slot0.1 427
DigIN Slot0.1 428
DigIN Slot0.1 429
DigIN Slot0.1 430
DigIN Slot0.1 418
DigIN Slot0.1 417
DigIN Slot0.1 408
DigIN Slot0.1 441
Description
OPEN = Setpoint 1
CLOSED = Setpoint 2
OPEN = Not active
CLOSED = Active
OPEN = Not active
CLOSED = Active
OPEN = Not active
CLOSED = Active
OPEN = Not active
CLOSED = Active
OPEN = Not active
CLOSED = Active
OPEN = Not active
CLOSED = Active. The motor potenti-
ometer reference INCREASES until
the contact is open.
OPEN = Not active
CLOSED = Active. The motor potenti-
ometer reference DECREASES until
the contact is open.
Switch between ramps 1 and 2.
OPEN = Ramp 1 Shape, Acceleration
Time 1 and Deceleration Time 1.
CLOSED = Ramp 2 Shape, Accelera-
tion Time 2 and Deceleration Time 2.
CLOSED = Forces control place to
fieldbus
VACON · 69
5