How To Connect Bluetooth Hands Free Adapter To Tmt250 Device; Bluetooth Settings Configuration - Teltonika TMT250 User Manual

Hide thumbs Also See for TMT250:

Table of Contents

TMT250 supports ONE connection at a time.

TMT250 can see up to 10 available devices. If there are more than 10 devices,

the list may change with each new scan.

External Name parameter works as a substring, which allows user to enter a part of the full

external device name. For example, if external device name is "HandsFreeHeadset" and user

enters "HandsFree" in External Name parameter window, then TMT250 will be allowed to

connect to an external device named "HandsFreeHeadset".

5.12.2 How to connect Bluetooth Hands Free adapter to TMT250 device

These are instructions on how to easily create a connection between a Bluetooth Hands

Free device and TMT250 device. First the TMT250 device Bluetooth settings need to be

configured. These are the required steps:

▪ Connect TMT250 device to PC using USB cable.

▪ Launch TMT250 Configurator and connect to the device as shown in Figure 23.

Figure 24 TMT250 configurator connected devices window

▪ After successful connection to the device wait a few moments while the device loads the

current configuration, then nagivate to Bluetooth section as shown on Figure 24.

Table of Contents