How To Connect Obd Ii Bluetooth Dongle To Fmb Device; Bluetooth Settings Configuration - Teltonika FMB920 User Manual

In order to pair FMB device with Android smartphone,
make sure that BT radio is enabled (visible) in device
configuration. It can be checked via SMS command too:
getparam 800
The answer has to be 2, which means "Enabled and visible".
Note: Unfortunately it is not possible to do the same on iPhone, because there
is no native SPP Bluetooth profile support in iPhone.

5.16 How to connect OBD II Bluetooth Dongle to FMB device

5.16.1 Bluetooth settings configuration

These are instructions how to easily prepare Bluetooth Dongle connection to FMB device.
First we need to configure FMB device Bluetooth settings for proper connection to this unit.
These are required steps:
1. Connect FMB device to PC using USB cable.
2. Launch FMB Configurator and connect to device as shown in Figure 1 below.
3. After successful connection to device press "Load from device" button to load device
current configuration visible at Figure 2.1
Figure 1. FMB configurator connected devices window
49