Set Up Your Development Environment; Tools Installation (Ides, Toolchains, Sdks); Other Software Required To Develop And Debug Applications For The Device; Set Up Your Hardware - Teltonika FMB125 Getting Started

Set up your Development Environment

Tools Installation (IDEs, Toolchains, SDKs)

FMB125 comes with our created firmware, therefore no additional development or scripting is
required for this unit to support AWS IoT. Only by using Teltonika Configurator
versions, connection point of AWS IoT server is required.

Other software required to develop and debug applications for the device

For debugging situations, device internal logs can be downloaded OTA by using our
platform or by using Teltonika Configurator.

Set up your hardware

All details about FMB125 can be located in our dedicated wiki page
Basic device startup instructions provided in
Device characteristics, power supply information:
FMB125 firmware change can be performed via
platform) or via device
Device LED information:
USB driver download, datasheet and quick start guide downloads:

Document Information

Glossary

Wiki – Teltonika IoT knowledge base - https://wiki.teltonika-iot-group.com/.
FOTA – Firmware Over The Air.
Configurator – Tool to configure Teltonika Telematics devices.
Crowd support forum – knowledge base dedicated for Troubleshooting.
For firmware supporting MQTT please contact your sales manager or contact directly via
Teltonika Helpdesk.
Other software required to develop and debug applications
for the device
For debugging situations, device internal logs can be downloaded OTA by using our
platform or by using Teltonika Configurator.

Setup your AWS account and Permissions

Refer to the online AWS documentation at Set up your AWS Account. Follow the steps outlined in
the sections below to create your account and a user and get started:
Configurator
FMB125 LED Status
FMB125 Wiki
FMB125 First Start.
FMB125 General description
FotaWEB (direct buyer gets access to this
FM Configurator
FotaWEB
FMB125 Downloads
FotaWEB