Table of Contents
Advertisement
Risk of Burns
Relieving Pressure
Important when Using Cleaning Agents
E 2008 Nordson Corporation
WARNING: Allow only qualified personnel to perform the following tasks.
Observe and follow the safety instructions in this document and all other
related documentation.
NOTE: Maintenance is an important preventive measure for maintaining
operating safety and extending the service life of the unit. It should not be
neglected under any circumstances.
WARNING: Hot! Risk of burns. Wear appropriate protective
clothing/equipment.
Some maintenance work can only be done when the melter is heated up.
WARNING: System and material pressurized. Relieve system of pressure
before disconnecting hoses, guns and hot melt handguns. Failure to
observe can result in serious burns.
Relieve pressure as described in section Installation, Connecting Hose,
Disconnecting.
S
Use only a cleaning agent recommended by the hot melt material
manufacturer. Observe the Material Safety Data Sheet for the cleaning
agent.
S
Properly dispose of cleaning agent according to local regulations.
VBN w/o Control System
Maintenance
Section 5
Maintenance
P/N 7146386A
5-1
Advertisement
Table of Contents
Troubleshooting
