Nordson VersaBlue VBN 50 Manual page 105

Option in configuration
code
Inputs for external pressure
display
Inputs for pressure switches
Additional gun/hose
connections
Additional motor controllers
Additional motors (types)
Operating voltage and main
switch
I/O and light tower
Spare
E 2008 Nordson Corporation
Box Also
available
as
accessory
28 D F: The unit can receive and process signals from
4 external pressure sensors.
E: The unit can receive and process signals from
8 external pressure sensors.
T: The unit can receive and process signals from
12 external pressure sensors.
S: The unit can receive and process signals from
16 external pressure sensors.
29 − F: The unit can receive and process signals from
4 pressure switches.
E: The unit can receive and process signals from
8 pressure switches.
T: The unit can receive and process signals from
12 pressure switches.
The pressure switches can turn off external motors.
30 − A: Two additional guns and hoses each can be
connected.
B: Six additional guns and hoses each can be
connected.
C: Ten additional guns and hoses each can be
connected.
31 − #: Up to six additional motor controllers can be
connected.
32 − A: AC motor with PowerFlex 40 motor controller
S: Servo motor with Servo Ultra 3000 motor
controller
(L): Lenze motor (only with Siemens SPS S7)
33 − 2: 200 − 240 V, 3-phase, Delta (red-yellow, 3-pin)
B: 200 − 240 V, 3-phase, Delta (black, 3-pin)
4: 380 − 415 V, 3-phase, WYE (red-yellow, 4-pin)
C: 380 − 415 V, 3-phase, WYE (black, 4-pin)
34 D: Standard XS2 / XS 2.1. Operating messages are
emitted via the XS2 interface and the valve plug.
D
XS 2.1 serves as an extension.
W: Four-color light tower. Indicates operating mode
of melter.
K: The light tower and the interfaces indicate the
operating modes of the melter.
35 − −
VBN w/o Control System
Options
Description
Continued ...
P/N 7146386A
10-3