Replacing Filter Cartridge - Nordson VersaBlue VBN 50 Manual

Adhesive melters vbn without controller

Table of Contents

Replacing Filter Cartridge

Cleaning Filter Cartridge

E 2008 Nordson Corporation

Nordson recommends keeping a supply of filter cartridges on hand to

prevent disruptions in production.

NOTE: Replace only when the filter cartridge is warm and the material is

soft (approx. 70 °C / 158 °F, depending on material).

WARNING: System and adhesive pressurized. Relieve system pressure.

Failure to observe can result in serious burns.

Fig. 5-25

1 Filling valve

2 Filter cartridge

NOTE: Proceed as described in the section Maintenance − Replacing Filter

Cartridge to replace the filter cartridge.

NOTE: Proceed as described in the section Maintenance − Cleaning Filter

Cartridge to clean the filter cartridge.

VBN w/o Control System

Maintenance

3 Drip tray

P/N 7146386A

5-21

Table of Contents