General Instructions Regarding Working With - Nordson VersaBlue VBN 50 Manual

General Instructions Regarding Working with

Definition of Terms
Manufacturer Information
Liability
Risk of Burns
E 2008 Nordson Corporation
General Instructions Regarding Working with Application Materials
Application materials can be e.g. thermoplastic hot melt materials,
adhesives, sealants, liquid adhesives and similar application materials. They
are referred to as materials.
NOTE: The materials that may be processed with your Nordson product
are described in the manual under Intended Use and Unintended Use.
When in doubt, please contact your Nordson representative.
Materials may be processed only when the manufacturer's product
descriptions and Safety Data Sheets (MSDS) are observed.
They provide information, amongst other things, on correct processing of
the product, transport, storage and disposal. Information regarding reactivity
and potentially hazardous decomposition products, toxic properties, flash
points, etc. can also be found there.
Nordson is not be liable for danger or damage resulting from the materials.
There is a risk of burns when handling heated materials. Work carefully and
wear appropriate protective clothing/equipment.
VBN w/o Control System
Application Materials
A-1
Appendix A
P/N 7146386A