Nordson VersaBlue VBN 50 Manual page 21

Equipment
Type
HM
HM
HM, CA
HM
E 2004 Nordson Corporation
CAUTION: Hot surfaces! Avoid contact with the hot metal surfaces
of guns, hoses, and certain components of the melter. If contact can
not be avoided, wear heat-protective gloves and clothing when
working around heated equipment. Failure to avoid contact with hot
metal surfaces can result in personal injury.
CAUTION: Some Nordson melters are specifically designed to
process polyurethane reactive (PUR) hot melt. Attempting to process
PUR in equipment not specifically designed for this purpose can
damage the equipment and cause premature reaction of the hot melt.
If you are unsure of the equipment's ability to process PUR, contact
your Nordson representative for assistance.
CAUTION: Before using any cleaning or flushing compound on or in
the equipment, read and comply with the manufacturer's instructions
and the MSDS supplied with the compound. Some cleaning
compounds can react unpredictably with hot melt or cold adhesive,
resulting in damage to the equipment.
CAUTION: Nordson hot melt equipment is factory tested with
Nordson Type R fluid that contains polyester adipate plasticizer.
Certain hot melt materials can react with Type R fluid and form a solid
gum that can clog the equipment. Before using the equipment,
confirm that the hot melt is compatible with Type R fluid.
Warning or Caution
1-11
Safety
A1EN−01−[XX−SAFE]−10