Table of Contents
Advertisement
Transport
Fig. 3-1
Storage
Unpacking
Lifting (Unpacked Melter)
E 2008 Nordson Corporation
WARNING: Allow only qualified personnel to perform the following tasks.
Observe and follow the safety instructions in this document and all other
related documentation.
S
Refer to section Technical Data for weight. Use only suitable transport
devices.
S
If possible, use the pallet (2) that came with the melter and use angle
1
brackets to fasten the melter.
S
Use sturdy cardboard or a box (1) to protect from damage.
S
Protect from humidity and dust.
2
S
Avoid jolts and vibrations.
CAUTION: Do not store melter outside! Protect from humidity, dust and
extreme temperature fluctuations (formation of condensation).
Unpack carefully and check for damage caused during transport. Save pallet,
angle brackets and box for later use, or dispose of it properly according to local
regulations.
Refer to the section Technical Data for weight. Lift melter only at the chassis
using suitable lifting equipment or a forklift.
VBN w/o Control System
3-1
Installation
Section 3
Installation
P/N 7146386A
Advertisement
Table of Contents
Troubleshooting
